Plate heat exchanger plate is separated by a certain distance, through the sealing gasket pressure formed by the channel. The hot and cold medium, the two kinds of fluid with temperature difference, will enter the plate channel from the corner hole through the heat transfer, and the adjacent channel fluid direction, whether countercurrent or downstream, will exchange heat through the plate.
Heat exchange plate is made of stainless steel plate pressing molding, it has 4 flow hole, middle pressure adult shape corrugated, pressure around the sealing groove. The sealing groove is provided with a sealant pad. The heat exchange plate is positioned and aligned by two guide rods, and the two clamping plates are compressed by clamping bolts to form the heat exchange runner in the inner cavity of the heat exchanger.
Plate and gasket
The plate materials and the gasket materials mainly depend on the corrosive properties and temperatures of the cold exchange medium and the heat exchange medium. The plate heat exchanger's plate materials and corresponding applicable places are given in Table 1 and its gasket materials and corresponding applicable places in Table 2 for your reference.
Table 1 Plate Materials
| Material name |
Thickness (mm) |
Material grade |
Applicable place |
| Stainless steel |
0.5-0.8 |
304,321,316,316L |
Places with serious corrosion caused by acid or base mediums and places not suitable for chloride ions |
| Commercial pure titanium |
0.5-0.8 |
Ti |
Alkali or salt making places, sea water desalination places, low-temperature places, freezing places or places with chloride-ion corrosion |
| Nickel |
0.5-0.8 |
Ni |
Places resistant to corrosion, hot alkali liquor corrosion, neutral solutions or subacid solutions |
| Acid-resistant steel |
0.5-0.8 |
RS-2, SM0254, HC-276 |
Sulfuric acid field and the fields with acid corrosion |
Table 2 Gasket Materials
| Material name |
Code |
Applicable temperature |
Applicable place |
| NBR |
N |
-20~110ºC |
Water, non-polar oil, mineral oil, lubricating oil, silicon oil, etc. |
| EPDM |
E |
-20~150ºC |
Steam, water, ozone, polar chemical mediums, alcohol, weak acids, weak bases, salt solutions, etc. |
| Chloroprene rubber |
C |
-40~100ºC |
Ammonia, mineral roil, lubricant, freon, etc. |
| Fluororubber |
F |
0~180ºC |
Inorganic acids, bases, mineral oil, halohydrocarbon and oxidant |
| Silicon rubber |
Q |
-40~200ºC |
Food field, etc. |
Selection of Plates
Plate heat exchanger plate is separated by a certain distance, through the sealing gasket pressure formed by the channel. The hot and cold medium, the two kinds of fluid with temperature difference, will enter the plate channel from the corner hole through the heat transfer, and the adjacent channel fluid direction, whether countercurrent or downstream, will exchange heat through the plate.
Heat exchange plate is made of stainless steel plate pressing molding, it has 4 flow hole, middle pressure adult shape corrugated, pressure around the sealing groove. The sealing groove is provided with a sealant pad. The heat exchange plate is positioned and aligned by two guide rods, and the two clamping plates are compressed by clamping bolts to form the heat exchange runner in the inner cavity of the heat exchanger.
Plate heat exchanger design selection, the pressure drop is also a certain requirement, so it should be checked. If the pressure drop exceeds the allowable pressure drop, it is necessary to re-calculate the design selection until the process requirements are met.
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of the years via E-mail /Fax/Phone
Q&A
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed
2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.
6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
7. Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture, including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine, automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
Company profile:
){kind=link}
){kind=link}