Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Finned tube
• Stainless steel
• Carbon steel
• Alloy steel
• Copper Nickel
• Titanium
• Hastelloy or special material hydrophilic, Epoxy coated, bare, e-coating
Applications
Air heat exchanger applications
-Provide necessary conditions for material drying
-Provide the necessary temperature for fluid transportation and storage
-Improve the comprehensive utilization rate of heat energy and waste heat recovery
-Reduce heat or cold loss of equipment
Generally speaking, the fin tube heat exchanger spacing, slice height is the main factors affecting the fin ratio, medium in the tube and outside the medium fin ratio and heat transfer coefficient will be significant. If there is a large difference in the heat transfer coefficient of the inner and outer film of the tube, the finned tube with a large finned ratio should be selected, such as steam heating air.
When there is a single-sided medium phase change, the heat transfer coefficient is very different, such as the exchange of hot and cold air, when the hot air falls below the dew point, finned tube heat exchanger can be used. Bare tubes are usually suitable for heat transfer between air and air without phase change, or between water and water. When using low finned tube, due to the weak heat transfer coefficient during this period, strengthening it will produce a certain effect. However, the excessive fin effect is not obvious, and the contact area between tube and tube is strengthened at the same time. Threaded tube or grooved tube can be used.
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of the 9 years via E-mail /Fax/Phone
Company profile: