Brazed plate heat exchanger, single flow structure of the most conventional flow channel structure,4 nozzles on the same side, should not be blocked, suitable for heat source water temperature is high. B, double flow structure special flow channel structure,4 nozzles are not on the same side, suitable for installation, suitable for the heat source water temperature is not high. Filter must be installed before the heat source water inlet of the heat exchanger to prevent the blockage of the heat exchanger.
An upright installation is recommended. When installing, ensure that the heat source water and cold water into the heat exchanger is opposite flow direction. When not in use for a long time, the water inside the heat exchanger should be emptied to prevent the occurrence of low temperature icing or high temperature corrosion. If the heat transfer efficiency of heat exchanger decreases, it should be cleaned and descaled in time. Before installing brazed plate heat exchanger, heat insulation material should be applied to eliminate condensate. When installing the heat exchanger, it cannot be supported and fixed by connecting pipes. The heat exchanger must be placed on the platform and tightened and fixed with metal splints or pull rods.
Application
1. Refrigeration: used as a condenser and evaporator.
2. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc.
3. Chemical industry: soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis cooling, etc.
4. Metallurgical industry: aluminate mother liquor heating or cooling, steel-making process cooling, etc.
5. Machinery industry: various quenching fluid cooling, reducer lubricating oil cooling, etc.
6. Power industry: high-voltage transformer oil cooling, generator bearing oil cooling, etc.
7. Paper industry: heat recovery of the bleaching process, heating of washing liquid, etc.
8. Textile industry: cooling of the aqueous solution of viscose silk alkali, cooling of boiling nitrocellulose, etc.
9. Food industry: fruit juice sterilization and cooling, animal and vegetable oil heating and cooling, etc.
10. Grease process: soap-based drying at atmospheric pressure, heating or cooling various process liquids.
11. Centralized heating: heating the waste heat area of a thermal power plant, heating bath water.
12. Others: petroleum, medicine, ships, seawater desalination, geothermal utilization.
Standard Materials:
Flow plates and connections in stainless steel .
End plates in stainless steel.
Brazing material is pure copper.
Working pressure /Temperature:
The units are constructed for max.
Working pressure/temperature 45Bar/-195°C-180°C
Additional Equipment:
Insulation.
Floor mounting feet.
Connection unions for welding on pipes.
In AISI 316 or ST.52-3.
Features
1>.Good sealing performance: Braze welding with pure copper
2>.Resistance to high pressure: 4.5Mpa at the most
3>.Wide range of applicable temperature: -195°C-180°C
4>. High heat transfer efficiency: 7000W/.K at the most
5>.Usability to heat transfer with a small temperature difference: The minimum temperature difference is 1.0°C.
6>. Compact structure, small volume, lightweight and less quantity of carried liquid
Recommended Applications
1>.Refrigeration area
2>.Air conditioning
3>. The HVAC area
4>.Solar heating
5>.Oil units
6>.Heat recovery
7>. Engine cooling and other industrial tasks.
Certificate: ISO9001:2008, CE, SGS, TUV,
Q&A
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed
2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.
6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
7. Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture, including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine, automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
8. Q: What are certificates and soft power used in manufacturing process?
A: Tranp has obtained ISO9001 certification, CE certification, standardized enterprise certification and various utility model patent certificates, with professional engineering and technical personnel engaged in the design of heat exchange equipment, thermal system and environmental recovery system. We will help customers to qualify CE certificates or other foreign certificates in different area all over the word.
9 .Q: What material and standards used for products?
A: All the products are manufactured as per national standards,including TSG21-2016, NB/T47004-2009, GB150.1-4-2011, GB/T151
2014, GB/T14296-2008 and etc.
10.Q: What is quality inspection procedure to maintain product quality?
A: Tranp has provided professional inspection regulation for Final quality controls for all products, to strictly control the quality of products from our warehouse.
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of the 9 years via E-mail /Fax/Phone
Company profile:
){kind=link}