Automatic Plate Heat Exchanger System Unit for Boiler System

• Customization: Available
• Certification: CE, ISO
• Application: Heat Transfer
• Principle: Mixing Heat Exchanger
• Style: Steel Type
• Material: Stainless Steel
• Plate Material: Carbon Steel, Stainless Steel
• Type: Plate Type
• Design Temp: as Per C
• Fin Type: Flat, Corrugated, Louvered
• Tube Material: Copper, Stainless Steel, Aluminium, Titaniu
• Transport Package: Polywood Box
• Specification: ISO9001: 2008, SGS
• Trademark: Tranp
• Origin: Guangzhou, China
• HS Code: 8419500090
• Production Capacity: 100 Sets/Per Month
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

             
 Plate heat exchanger is mainly composed of heat transfer plate, sealing gasket, pressure plate at both ends, clamping bolt, bracket and so on.  The functions of various components of plate heat exchanger are as follows: a, heat transfer plate heat transfer plate is the primary heat exchanger for the role of components, usually corrugated made of herringbone, according to the fluid medium is not the same, the data of heat transfer plate is not the same, mostly made of stainless steel and titanium.  Sealing gasket plate heat exchanger sealing gasket is mainly in the heat exchange plate between the sealing role.  Data are: nitrile rubber, epDM rubber, fluorine rubber and so on, according to different media choose different rubber.  
Three, both ends of the pressure plate at both ends of the pressure plate is the first clamping pressure on all the heat transfer plate, to ensure that the fluid medium does not leak.  Four, clamping bolt clamping bolt is the primary role of fastening both ends of the pressure plate.  The clamping bolt is usually double-threaded, so that the torque of the fixing plate is uniform when the bolt is pretightened.  Five, the hanger is mainly to support the heat exchange plate, so that it is easy to disassemble, clean, assemble and so on.       

 

Structure of Plate Heat Exchanger Component Material Heat-exchange plate: SUS304, SUS316L, SMO254, titanium, nickel, Hastelloy alloy.
Gasket seal: NBR, H-NBR, EPDM, food pad, fluorine rubber, silicon rubber
Frame: Carbon steel, stainless steel, coated stainless steel
Clamping bolt: Galvanized carbon steel, stainless steel
Interface: Rubber, carbon steel, stainless steel Guide bar: Galvanized carbon steel, stainless steel Introduction to Plate Sheet        

 

Material Description Code Applicable Temperature (degree centigrade) Anti-corrosive Performance and Applicable Occasions

NBR N -20~110 Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc.

EPDM E -50~150 Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc. CR C -40~100 Ammonia, mineral oil and lubricant, etc.

Fluorine Rubber F 0~180 Inorganic acid, alkali, mineral oil and Haloalkane, etc. Silicon Rubber Q -65~230 Resistant to cold current 






The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition;     
 Fillets in the sheet are of "Interlocked" structure which allows for mutual interlocking of sheets.
The herringbone corrugated sheet is featured by high heat transfer efficiency; in addition, net-shaped contacts are formed in mutually reverse directions after the entire machine is assembled, featuring good pressure resistance. Introduction to Sealing Gasket. The sealing gasket is inserted and fixed to the slot in heat-exchanging sheet, featuring easy insertion and replacement of sealing gasket, which can substantially reduce stoppage time.  The sealing function is separated from fixing function. Even if some "clamps" with fixing function fail, the gasket can still have sealing function in the slot. Application : HVAC(constant-temperature swimming pool, solar energy ,domestic water , air condition and heating ), textile printing & dyeing industry, pharmacy, food , chemical , paper making , steel and electromechanical and so on .

 

How does a Plate Heat Exchanger Work?
Each unit consists of a series of grooved plates that are individually gasketed and pressed tightly together by compression bolts within a frame. Fluids enter and exit the PHE through portholes in one or both ends of the frame. Within the unit, the fluid to be heated or cooled flows down one side of each plate, while the heating or cooling medium flows in the opposite direction across the other side.

The huge temperature difference created by these opposite flows allows maximum heat transfer efficiency for the closest possible approach temperature.

 About Warranty We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fail to work due to quality problem, only the free repairing operation guide  is available in the rest of  years via E-mail /Fax/Phone
For any more details:   


   

Company profile: