Volume heat exchanger
Volumetric heat exchange unit has the advantages of compact structure, reliable operation, simple and intuitive operation, and is the preferred high efficiency and energy saving product. The product is suitable for residential buildings, offices, factories and mines, hospitals, hotels, schools and other occasions of heating, bathing and air conditioning systems. Integral heat exchange unit can be used for both water - water exchange and steam - water exchange.
In the domestic application of positive displacement heat exchanger industry, mainly concentrated in solar water heating engineering, HVAC heating engineering, swimming pool heating engineering, air energy hot water engineering, boiler room heating engineering, water supply system engineering, mechanical and electrical engineering and other industries, may encounter the selection of the equipment project.
Designed Pressure:
Coiled tube: 1.6MPa
Tank: 0.6/1.0/1.6MPa
Component Materials:
Coiled tube: Stainless steel No.304 and red copper
Tank: Stainless steel No.304 and carbon steel
Please provide the following working parameters, we will provide you with professional design and selection Suggestions.
| Capacity (Kw/Kcal/h) |
| Hot side medium |
|
Cold side medium |
|
| Flow rate |
|
Flow rate |
|
| Inlet temperature |
|
Inlet temperature |
|
| outlet temperature |
|
outlet temperature |
|
| Working pressure |
|
Working pressure |
|
| Allowable prssure drop |
|
Allowable prssure drop |
|
Features
The selection determines the use. In the relevant selection atlas and documents, the design effluent temperature is below 60 degrees Celsius. For the user working condition of heating, the required temperature is at least 80 degrees. In addition, the heat per hour of volumetric heat exchanger is also low, can not meet the heat demand of heat and a lot of heat.
Diversion volume type heat exchanger is in the introduction of the company on the basis of absorbing the international advanced products, research and development of a new generation of positive displacement at the factory designed and developed technology. The heat exchange equipment for automatic temperature control function, it is a kind of make full use of steam energy, with high efficiency, energy saving heat exchanger, which are widely used in industrial and civil building hot water supply system. It has the advantages of large water storage, safe and stable hot water supply, high thermal efficiency and no noise.
Small cold water area, high volume utilization rate. The positive displacement heat exchanger has the advantages of large water storage, low head loss, safe and stable water supply and convenient scale removal.
Volume Heat Exchanger usage technical parameter for reference :
| volumetric heat exchanger technical parameters |
| (heat source:saturated steam 0.4Mpa or not hot water 90 Celsius ,cold side outlet temperature 60 Celsius ) |
| Type |
thermal load 104kcal/h |
volume |
nominal diameter |
boundary dimension |
design pressure |
equipment net wgight |
| steam |
hot water |
m 3 |
mm |
mm |
Mpa |
kg |
| JMF2-1.0-1000 |
20 |
10 |
1.0 |
1000 |
φ1000*1860 |
0.6/1.0/1.6 |
320/405/530 |
| JMF3-1.0-1000 |
30 |
15 |
345/430/555 |
| JMF4-1.0-1000 |
40 |
20 |
370/455/580 |
| JMF4-1.5-1000 |
40 |
20 |
1.5 |
1100 |
φ1100*2180 |
0.6/1.0/1.6 |
425/535/695 |
| JMF5-1.5-1000 |
50 |
25 |
450/560/720 |
| JMF6-1.5-1000 |
40 |
30 |
757/585/745 |
| JMF4-2.0-1200 |
40 |
20 |
2.0 |
1200 |
φ1200*2300 |
0.6/1.0/1.6 |
530/665/935 |
| JMF6-2.0-1200 |
60 |
30 |
580/710/985 |
| JMF8-2.0-1200 |
80 |
30 |
630/760/1035 |
| JMF6-3.0-1400 |
60 |
30 |
3.0 |
1400 |
φ1400*2685 |
0.6/1.0/1.6 |
655/830/1170 |
| JMF8-3.0-1400 |
80 |
40 |
705/880/1220 |
| JMF10-3.0-1400 |
100 |
50 |
750/930/1270 |
About Warranty
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of years via E-mail /Fax/Phone
FAQ
1 Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
2 Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture,
including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine,
automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
These machine
3 Q: Whate are certificates and soft power used in manufacturing process?
A: Tranp has obtained ISO9001 certification, CE certification,
standardized enterprise certification and various utility model patent certificates, with professional engineering and technical personnel engaged in the design of heat exchange equipment,thermal system and environmental recovery system. We will help customers to qualify CE certificates or other foreign certificates in different area all over the word.
4 .Q: What material and standards used for products?
A: All the products are manufactured as per national standards,
includingTSG21-2016,NB/T47004-2009,GB150.1-4-2011,GB/T151-2014,GB/T14296-2008 and etc.
5Q: What is quality inspection procedure to maintain product quality?
A: Tranp has provided professional inspection regulation for Final quality controls for all products, to strictly control the quality of products from our warehouse.
Company profile:
){kind=link}
){kind=link}