Customization: | Available |
---|---|
Certification: | CE, ISO |
Application: | Heater, Cooler, Vaporizer, Condenser |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Plate Shell Heat Exchanger for Methanol Cooling in ORC Generator Unit
Plate&Shell Heat Exchanger, newly arrived counterpart for Plate and Frame Heat Exchanger, consists of an Outer Shell under Pressure Vessel Code and a heating Plate Bundles, and connecting devices. If you may ask, it is perfectly fit for high-volume and high-pressure&temperature operation.
Because of the unique structure, larger spacing between plates in particular, this type of exchanger is less likely to accumulate dust and scale. Far beyond that, it again inherits excellent coefficient from Plate&Frame Exchanger, owing to the heat transfer properties of the plates.
Plate Shell Heat Exchanger for Methanol Cooling in ORC Generator Unit, typical case of application for Plate&Shell Heat Exchanger, applies R245FA Coolant to lower the temperature of 37% Methanol, from 93Degree to 79Degree. In that, our customers can then move on to the next step of their production.
Plate Material Could be:
SS304, SS316L, 904L, SMO254 Titanium, Hastelloy, Nickel
Shell Material Could be:
SS304, SS316L, 904L, SMO254 Titanium, Hastelloy, Nickel, Carbon Steel Q235-B and others
Structure Can Be Either Fully-Welded Or Semi-Welded:
Former one is more economic but cannot be cleaned at shell side, while the latter is detachable and thereby expensive.
(Left: Fully-Welded; Right: Semi-Welded)
Design Data for Our Plate&Shell Heat Exchanger Is As Following
Design Temp. | -195-500Degree |
Design Pressure | Vacuum-100Bar |
Plate Thickness | 0.6/0.8/1.0mm |