The heat exchange area of brazed plate heat exchanger consists of a thin metal plate which is stamped into corrugated shape. Fluid flows through channels between plates through carefully arranged corner interfaces. Refrigerant and heat medium always flow in opposite directions in adjacent channels for heat transfer. Because the edge of the brazed plate heat exchanger is welded, the medium will not flow out of the equipment.
Compared to traditional brazed plate heat exchangers, brazed plate heat exchangers have high heat transfer efficiency and are very compact and can be easily installed in limited space locations, thereby reducing the number of parts throughout the system, saving operating costs and bringing greater benefits to customers.
Application
1. Refrigeration: used as a condenser and evaporator.
2. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc.
3. Chemical industry: soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis cooling, etc.
4. Metallurgical industry: aluminate mother liquor heating or cooling, steel-making process cooling, etc.
5. Machinery industry: various quenching fluid cooling, reducer lubricating oil cooling, etc.
6. Power industry: high-voltage transformer oil cooling, generator bearing oil cooling, etc.
7. Paper industry: heat recovery of the bleaching process, heating of washing liquid, etc.
8. Textile industry: cooling of the aqueous solution of viscose silk alkali, cooling of boiling nitrocellulose, etc.
9. Food industry: fruit juice sterilization and cooling, animal and vegetable oil heating and cooling, etc.
10. Grease process: soap-based drying at atmospheric pressure, heating or cooling various process liquids.
11. Centralized heating: heating the waste heat area of a thermal power plant, heating bath water.
12. Others: petroleum, medicine, ships, seawater desalination, geothermal utilization.
Standard Materials:
Flow plates and connections in stainless steel .
End plates in stainless steel.
Brazing material is pure copper.
Working pressure /Temperature:
The units are constructed for max.
Working pressure/temperature 45Bar/-195°C-180°C
Brazed plate heat exchangers - specific steps for cleaning scale
1) Washing: before pickling, the heat exchanger is first washed open, so that there is no mud, scale and other impurities in the heat exchanger, which can not only improve the effect of pickling, but also reduce the acid consumption of pickling.
2) Pour the cleaning liquid into the cleaning equipment, and then inject it into the heat exchanger.
3) pickling: the heat exchanger filled with acid solution is statically soaked for 2h, and then the continuous dynamic cycle is 3 ~ 4h, during which the positive and negative alternating cleaning is carried out every 0.5h. After pickling, if the pH value of the acid is greater than 2, the acid can be reused, otherwise, the acid washing solution should be diluted and neutralized and removed.
4) alkali washing: after the end of pickling, NaOH,Na3PO4, softened water is prepared in a certain proportion, and the heat exchanger is alkali washed by dynamic cycle to achieve acid-base neutralization, so that the heat exchanger plate is no longer corroded.
5) Water washing: after alkali washing, wash the heat exchanger repeatedly with clean softened water for 0.5h, and rinse the residue in the heat exchanger thoroughly.
6) Record: In the cleaning process, the time of each step should be strictly recorded to check the cleaning effect.
Features:
1>.Good sealing performance: Braze welding with pure copper
2>.Resistance to high pressure: 4.5Mpa at the most
3>.Wide range of applicable temperature: -195°C-180°C
4>. High heat transfer efficiency: 7000W/.K at the most
5>.Usability to heat transfer with a small temperature difference: The minimum temperature difference is 1.0°C.
6>. Compact structure, small volume, lightweight and less quantity of carried liquid
Recommended Applications:
1>.Refrigeration area
2>.Air conditioning
3>. The HVAC area
4>.Solar heating
5>.Oil units
6>.Heat recovery
7>. Engine cooling and other industrial tasks.
Certificate: ISO9001:2008, CE, SGS, TUV,
FAQ :
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed
2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ datasheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.
6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of years via E-mail /Fax/Phone
Company profile: