The shell-and-tube heat exchanger For shell and tube heat exchangers, a problem that is easily ignored is the vibration of heat exchange tubes. And the vibration of heat exchange tube bundle is often the destruction of heat exchange tube. The position of the heat exchange tube vibration is wide, can be a certain two baffle between all the heat exchange tube vibration at the same time, or only a few rows of heat exchange tube vibration. It may also be in the medium inlet or outlet end of some heat exchange tube vibration. In short, the vibration of the heat exchange tube may occur in any one or more places of the heat exchange tube bundle.
Food grade stainless steel sanitary shell and tube heat exchanger |
| Profile type |
Tuber exchanger |
| Material |
SS304 or SS316L |
| Capacity |
0.1T/H-100T/H (Customized) |
| Working pressure |
0.8Mpa(Customized) |
| Heating Area/Cooling Area |
0.1~20M2 |
| The Diameter of Pipe |
Φ6/Φ9/Φ12/Φ16/Φ19/Φ25mm |
| Inlet Outlet |
Φ19~ Φ219mm |
The main reason for the premature scrap of heat exchanger
There are many and complex factors causing the vibration of heat exchange tube. When the medium flow is close to the critical flow rate of resonance, the heat exchange tube bundle will produce large vibration. In addition, local turbulence and eddy currents in the internal medium of heat exchanger will also cause vibration of heat exchange tube.
The vibration analysis of the tube bundle of heat exchanger is to determine the vibration position and vibration properties of the heat exchange tube, to understand the cause of the vibration of the heat exchange tube, so as to eliminate the vibration of the heat exchange tube. There are many ways to eliminate the vibration of the heat exchange tube. The natural frequency of the heat exchange tube bundle or the flow state of the fluid can be changed by changing the structure size of the heat exchanger, so as to eliminate the vibration of the heat exchange tube. Or add local support plate to the vibration part of the heat exchange tube bundle to restrain the vibration of the heat exchange tube.
Features
- 1). Determine the required heat exchange area according to the known flow rates of cold and hot fluids, the initial and final temperatures, and the specific heat capacity of the fluid.
- 2). When selecting a heat exchanger, pay attention to the pressure level, the operating temperature, and the connection conditions of the interface. Under the premise of pressure drop and installation conditions, the shell-and-tube heat exchanger can be used to increase the heat exchange capacity by using a lengthening type with a small diameter.
- 3). The pressure drop of the heat exchanger should not be too large, generally controlled between 0.01 and 0.05 MPa;
- 4). The flow rate should take into account the viscosity of the fluid, the flow rate of the viscosity should be less than 0.5 ~ 1.0m / s; the flow rate in the general fluid tube should be 0.4 ~ 1.0m / s;
Our advantages:
1. High heat transfer coefficient
2.Not easy to scale
3.Not easy to leak
4.Small footprint
Selection features:
Q&A
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed
2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ datasheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.
6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
Q7: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture,
including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine,
automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
These machine
Q8: Whate are certificates and soft power used in manufacturing process?
A: Tranp has obtained ISO9001 certification, CE certification,
standardized enterprise certification and various utility model patent certificates, with professional engineering and technical personnel engaged in the design of heat exchange equipment,
thermal system and environmental recovery system. We will help customers to qualify CE certificates or other foreign certificates in different area all over the word.
Q9: What material and standards used for products?
A: All the products are manufactured as per national standards,
including TSG21-2016, NB/T47004-2009,GB150.1-4-2011,GB/T151-2014,GB/T14296-2008 and etc.
Q10: What is quality inspection procedure to maintain product quality?
A: Tranp has provided professional inspection regulation for Final quality controls for all products, to strictly control the quality of products from our warehouse.
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of years via E-mail /Fax/Phone
Company profile:
){kind=link}