Volume heat exchanger is a separate equipment, such as heater, cooler and condenser, etc.; It can also be part of a process equipment, such as the heat exchanger in an ammonia synthesis tower.Positive displacement heat exchanger is a pressure vessel, according to the actual use of pressure. According to the different forms of heat exchange tube, volumetric heat exchanger can be divided into floating coil heat exchanger and U-tube heat exchanger. According to the appearance of different products, volumetric heat exchanger can be divided into vertical volumetric heat exchanger and horizontal volumetric heat exchanger.
Designed Pressure:
Coiled tube: 1.6MPa
Tank: 0.6/1.0/1.6MPa
Component Materials:
Coiled tube: Stainless steel No.304 and red copper
Tank: Stainless steel No.304 and carbon steel
Please provide the following working parameters, we will provide you with professional design and selection Suggestions.
| Capacity (Kw/Kcal/h) |
| Hot side medium |
|
Cold side medium |
|
| Flow rate |
|
Flow rate |
|
| Inlet temperature |
|
Inlet temperature |
|
| outlet temperature |
|
outlet temperature |
|
| Working pressure |
|
Working pressure |
|
| Allowable prssure drop |
|
Allowable prssure drop |
|
Features
Diversion volume type heat exchanger is in the introduction of the company on the basis of absorbing the international advanced products, research and development of a new generation of positive displacement at the factory designed and developed technology. The heat exchange equipment for automatic temperature control function, it is a kind of make full use of steam energy, with high efficiency, energy saving heat exchanger, which are widely used in industrial and civil building hot water supply system. It has the advantages of large water storage, safe and stable hot water supply, high thermal efficiency and no noise.
Small cold water area, high volume utilization rate. The positive displacement heat exchanger has the advantages of large water storage, low head loss, safe and stable water supply and convenient scale removal.
Volume Heat Exchanger usage technical parameter for reference :
| volumetric heat exchanger technical parameters |
| (heat source:saturated steam 0.4Mpa or not hot water 90 Celsius ,cold side outlet temperature 60 Celsius ) |
| Type |
thermal load 104kcal/h |
volume |
nominal diameter |
boundary dimension |
design pressure |
equipment net wgight |
| steam |
hot water |
m 3 |
mm |
mm |
Mpa |
kg |
| JMF2-1.0-1000 |
20 |
10 |
1.0 |
1000 |
φ1000*1860 |
0.6/1.0/1.6 |
320/405/530 |
| JMF3-1.0-1000 |
30 |
15 |
345/430/555 |
| JMF4-1.0-1000 |
40 |
20 |
370/455/580 |
| JMF4-1.5-1000 |
40 |
20 |
1.5 |
1100 |
φ1100*2180 |
0.6/1.0/1.6 |
425/535/695 |
| JMF5-1.5-1000 |
50 |
25 |
450/560/720 |
| JMF6-1.5-1000 |
40 |
30 |
757/585/745 |
| JMF4-2.0-1200 |
40 |
20 |
2.0 |
1200 |
φ1200*2300 |
0.6/1.0/1.6 |
530/665/935 |
| JMF6-2.0-1200 |
60 |
30 |
580/710/985 |
| JMF8-2.0-1200 |
80 |
30 |
630/760/1035 |
| JMF6-3.0-1400 |
60 |
30 |
3.0 |
1400 |
φ1400*2685 |
0.6/1.0/1.6 |
655/830/1170 |
| JMF8-3.0-1400 |
80 |
40 |
705/880/1220 |
| JMF10-3.0-1400 |
100 |
50 |
750/930/1270 |
Application
In the application of positive displacement heat exchanger industry, mainly concentrated in
solar water heating engineering,
HVAC heating engineering,
swimming pool heating engineering,
air energy hot water engineering,
boiler room heating engineering,
water supply system engineering,
mechanical and electrical engineering
and other industries,
As per the selection of the equipment project.
About Warranty
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of years via E-mail /Fax/Phone
FAQ
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed
2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ datasheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.
6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
7. Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture,
including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine,
automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
These machine
8. Q: Whate are certificates and soft power used in manufacturing process?
A: Tranp has obtained ISO9001 certification, CE certification,
standardized enterprise certification and various utility model patent certificates, with professional engineering and technical personnel engaged in the design of heat exchange equipment,thermal system and environmental recovery system. We will help customers to qualify CE certificates or other foreign certificates in different area all over the word.
9 .Q: What material and standards used for products?
A: All the products are manufactured as per national standards,
includingTSG21-2016,NB/T47004-2009,GB150.1-4-2011,GB/T151-2014,GB/T14296-2008 and etc.
10.Q: What is quality inspection procedure to maintain product quality?
A: Tranp has provided professional inspection regulation for Final quality controls for all products, to strictly control the quality of products from our warehouse.
Company profile:
){kind=link}