The high-effect heat-exchange component--floating coiled tube is adopted in the volume heat exchanger to heat the water in the tank layer by layer until the temperature of the outlet reaches the preset value and generates domestic hot water. Volume heat exchanger with floating coiled tube is a new type of water heating equipment which is extensively applied in sanitary water heating system in schools, hospitals, and hotels.
The heat medium temperature drop of positive displacement heat exchanger is large. When the soda water heat exchange, the condensate water outlet temperature is about 50ºC, the return pipe should be set up and down the trap, to bring convenience to use and maintenance. On the condition of water-water heat exchange, the heat temperature drop is of 2 and 2.5 times of the same type of heat exchanger, high temperation between 120 and 150ºC hot water heat exchange can be reduced to 70 ~ 75ºC.
Designed Pressure:
Coiled tube: 1.6MPa
Tank: 0.6/1.0/1.6MPa
Component Materials:
Coiled tube: Stainless steel No.304 and red copper
Tank: Stainless steel No.304 and carbon steel
Applications
In the domestic application of positive displacement heat exchanger industry, mainly concentrated in solar water heating engineering, HVAC heating engineering, swimming pool heating engineering, air energy hot water engineering, boiler room heating engineering, water supply system engineering, mechanical and electrical engineering and other industries, may encounter the selection of the equipment project.
Diversion volume type heat exchanger is in the introduction of the company on the basis of absorbing the international advanced products, research and development of a new generation of positive displacement at the factory designed and developed technology. The heat exchange equipment for automatic temperature control function, it is a kind of make full use of steam energy, with high efficiency, energy saving heat exchanger, which are widely used in industrial and civil building hot water supply system. It has the advantages of large water storage, safe and stable hot water supply, high thermal efficiency and no noise.
The bearings of this series of heat exchangers are selected according to the standard. Among the three bearings, one is fixed and two are movable bearings. The anchor bolt of the movable bearing adopts double nuts. The first nut is tightened backward after adding a small gasket, and then locked with the second nut, so that the bearing can slide freely on the basis. In use, scale should be cleaned regularly according to the quality and use of the heated water. When the hardness of the heated water is high, appropriate softening measures should be adopted. The pipe flange of this series heat exchanger is flat welding flange.
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of the 9 years via E-mail /Fax/Phone
Company profile:
){kind=link}
){kind=link}