Volume heat exchanger is a separate equipment, such as heater, cooler and condenser, etc.; It can also be part of a process equipment, such as the heat exchanger in an ammonia synthesis tower. Due to the limitations of manufacturing process and scientific level, the early heat exchanger can only use a simple structure, and the heat transfer area is small, large and bulky. With the development of manufacturing technology,volumn heat exchanger is gradually updated and designed with current requirement. It not only has a large heat transfer area per unit volume, but also has a better heat transfer effect, which has become a typical heat exchanger in industrial production for a long time.
The heat medium temperature drop of positive displacement heat exchanger is large. When the soda water heat exchange, the condensate water outlet temperature is about 50ºC, the return pipe should be set up and down the trap, to bring convenience to use and maintenance. On the condition of water-water heat exchange, the heat temperature drop is of 2 and 2.5 times of the same type of heat exchanger, high temperation between 120 and 150ºC hot water heat exchange can be reduced to 70 ~ 75ºC.
Designed Pressure:
Coiled tube: 1.6MPa
Tank: 0.6/1.0/1.6MPa
Component Materials:
Coiled tube: Stainless steel No.304 and red copper
Tank: Stainless steel No.304 and carbon steel
Please provide the following working parameters, we will provide you with professional design and selection Suggestions.
| Capacity (Kw/Kcal/h) |
| Hot side medium |
|
Cold side medium |
|
| Flow rate |
|
Flow rate |
|
| Inlet temperature |
|
Inlet temperature |
|
| outlet temperature |
|
outlet temperature |
|
| Working pressure |
|
Working pressure |
|
| Allowable prssure drop |
|
Allowable prssure drop |
|
Positive displacement heat exchanger has good heat exchange effect, good heat dissipation effect, small heat dissipation loss and energy saving. At the same time, when steam is used as heat medium, about 15% of the heat of condensate can be recovered.
Volume Heat Exchanger usage technical parameter for reference :
| volumetric heat exchanger technical parameters |
| (heat source:saturated steam 0.4Mpa or not hot water 90 Celsius ,cold side outlet temperature 60 Celsius ) |
| Type |
thermal load 104kcal/h |
volume |
nominal diameter |
boundary dimension |
design pressure |
equipment net wgight |
| steam |
hot water |
m 3 |
mm |
mm |
Mpa |
kg |
| JMF2-1.0-1000 |
20 |
10 |
1.0 |
1000 |
φ1000*1860 |
0.6/1.0/1.6 |
320/405/530 |
| JMF3-1.0-1000 |
30 |
15 |
345/430/555 |
| JMF4-1.0-1000 |
40 |
20 |
370/455/580 |
| JMF4-1.5-1000 |
40 |
20 |
1.5 |
1100 |
φ1100*2180 |
0.6/1.0/1.6 |
425/535/695 |
| JMF5-1.5-1000 |
50 |
25 |
450/560/720 |
| JMF6-1.5-1000 |
40 |
30 |
757/585/745 |
| JMF4-2.0-1200 |
40 |
20 |
2.0 |
1200 |
φ1200*2300 |
0.6/1.0/1.6 |
530/665/935 |
| JMF6-2.0-1200 |
60 |
30 |
580/710/985 |
| JMF8-2.0-1200 |
80 |
30 |
630/760/1035 |
| JMF6-3.0-1400 |
60 |
30 |
3.0 |
1400 |
φ1400*2685 |
0.6/1.0/1.6 |
655/830/1170 |
| JMF8-3.0-1400 |
80 |
40 |
705/880/1220 |
| JMF10-3.0-1400 |
100 |
50 |
750/930/1270 |
About Warranty:
We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide is available in the rest of the 9 years via E-mail /Fax/Phone
Q&A
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed
2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.
6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.
7. Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture, including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine, automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc.
Company profile:
){kind=link}